Randy Lee
NORTH
Summary
Dynamic Technology Innovator with extensive experience in emerging technologies and continuous improvement initiatives. Proficient in data analysis, software development, and project management tools to drive operational efficiency. Expert in implementing innovative solutions and adapting to fast-paced environments to enhance productivity.
Overview
31
31
years of professional experience
Work History
Janitorial Assistant
Sizemoore Inc.
08.2021 - 11.2021
- Operated industrial cleaning equipment to maintain cleanliness and safety standards in facilities.
- Conducted routine inspections to identify maintenance needs and ensure proper functioning of cleaning tools.
- Coordinated with management to develop cleaning schedules aligned with facility operational hours and events.
- Swept hard surface floors using broom or push broom dust mop.
- Moving large bins of cardboard and trash to compactor
- Safely Operate Electric Pallet Jack to move materials
- Unloaded and stacked materials by raising and lowering lifting devices.
- Contributed to a safer work environment by performing regular equipment maintenance and reporting any issues promptly.
Roofing Laborer
H & H Roofing
07.2021 - 10.2021
- Operated hand and power tools for roof installation and repairs.
- Assisted in the safe removal of old roofing materials.
- Collaborated with team members to ensure timely project completion.
- Maintained clean and organized work areas to promote safety.
- Followed safety protocols to minimize hazards on job sites.
- Supported senior workers by preparing materials and equipment daily.
- Adapted quickly to changing work conditions and project requirements.
- Performed job duties at low, medium, and advanced heights on regular basis while observing safety protocols to avoid possibility of accidents and falls.
- Maintained good physical fitness in order to maintain proper balance on inclined surfaces and at high levels off ground.
- Expedited task completion through proficient use of hand tools, power tools, and other specialized equipment.
Assistant
Moores Handy Man Services
09.2017 - 07.2021
- We were a handy man service that cover many things including General repairs, pressure washing, painting, gutter cleanning, Hauling and other various duties,
- Painted indoor areas such as hallways, bathrooms, and lobbies.
- Maintained a clean and organized workspace, minimizing disruptions for clients during projects.
- Prepared surfaces for painting by cleaning, sanding, and repairing defects to ensure smooth results.
- Inspected washing tools, equipment, and materials daily for damage or needed repairs.
- Used scrapers, brushes and cleaners to eliminate layered on dirt, mud, or debris.
- Cleaned wash equipment after shift and confirmed proper storage.
- Increased workspace efficiency by organizing storage areas and maintaining an inventory of tools and supplies.
- Loaded, unloaded, and moved material to and from storage and production areas.
- Maintained a safe work environment with compliance to company policies, OSHA regulations, and local building codes.
- Collaborated with team members to complete large-scale deep cleaning projects.
- Removed trash, debris and other waste materials from premises.
- Handled delicate surfaces with care, preventing damage while achieving thorough cleaning results.
Cashier
Dollar General Store
04.2015 - 07.2015
- Processed customer transactions accurately and efficiently at point of sale.
- Assisted customers with product inquiries and store navigation.
- Maintained cleanliness and organization of checkout area to enhance shopping experience.
- Collaborated with team members to manage inventory levels and restock merchandise.
- Handled cash register operations, including cash handling and balancing end-of-day totals.
- Greeted customers entering store and responded promptly to customer needs.
- Worked flexible schedule and extra shifts to meet business needs.
- Restocked and organized merchandise in front lanes.
- Counted money in cash drawers at beginning and end of shifts to maintain accuracy.
- Handled multiple payment methods securely, minimizing discrepancies and potential losses.
- Ensured compliance with company policies and procedures while processing transactions efficiently.
PC/PSP Repair
Self Employed
02.2005 - 05.2005
- Update knowledge and skills to keep up with rapid advancements in computer technology.
- Provide technical support for clients.
- Test and verify hardware and support peripherals to ensure that they meet specifications and requirements, by recording and analyzing test data.
- Monitor functioning of equipment and make necessary modifications to ensure system operates in conformance with specifications.
- Analyze information to determine, recommend, and plan layout, including type of computers and peripheral equipment modifications.
- Build, test, and modify product prototypes using working models or theoretical models constructed with computer simulation.
- Analyze user needs and recommend appropriate hp hardware.
- Select hardware and material, assuring compliance with specifications and product requirements.
General Warehouse Associate
K-Mart Distribution Center
08.1995 - 05.2005
- Inspect product load for accuracy and safely move it around the warehouse or facility to ensure timely and complete delivery.
- Move controls to drive forklift to transport materials between loading, processing, and storage areas.
- Move levers or controls that operate lifting devices, such as forklifts, lift beams with swivel-hooks, or hoists, or elevating platforms, to load, unload, transport, or stack material.
- Position lifting devices under, over, or around loaded pallets, skids, or boxes and secure material or products for transport to designated areas.
- Manually or mechanically load or unload materials from pallets, skids, platforms, cars, lifting devices, or other transport vehicles.
- Perform routine maintenance on vehicles or auxiliary equipment, such as cleaning, lubricating, recharging batteries, fueling, or replacing liquefied-gas tank.
- Weigh materials or products and record weight or other production data on tags or labels.
- Operate or tend automatic stacking, loading, packaging, or cutting machines.
Machine Operator
Kinro Inc
05.1993 - 09.1996
- Examine, measure, and weigh materials or products to verify conformance to specifications, using measuring devices such as rulers, micrometers, or scales.
- Set up, operate, or tend machines that cut or slice materials, such as glass.
- Stack and sort cut material for packaging, further processing, or shipping, according to types and sizes of material.
- Review work orders, blueprints, specifications, or job samples to determine components, settings, and adjustments for cutting and slicing machines.
- Type instructions on computer keyboards, push buttons to activate computer programs, or manually set cutting guides, clamps, and knives.
- Remove defective or substandard materials from machines, and readjust machine components so that products meet standards.
- Press buttons, pull levers, or depress pedals to start and operate cutting and slicing machines.
- Adjust machine controls to alter position, alignment, speed, or pressure.
- Maintain production records, such as quantities, types, and dimensions of materials produced.
- Monitor operation of cutting or slicing machines to detect malfunctions or to determine whether supplies need replenishment.
Sheet Metal Worker
Air Treatment, Inc
05.1991 - 08.1991
- Determine project requirements, including scope, assembly sequences, and required methods and materials, according to blueprints, drawings, and written or verbal instructions.
- Lay out, measure, and mark dimensions and reference lines on material, such as roofing panels, according to drawings or templates, using calculators, scribes, dividers, squares, and rulers.
- Fasten seams or joints together with welds, bolts, cement, rivets, solder, caulks, metal drive clips, or bonds to assemble components into products or to repair sheet metal items.
- Install assemblies, such as flashing, pipes, tubes, heating and air conditioning ducts, furnace casings, rain gutters, or downspouts in supportive frameworks.
- Convert blueprints into shop drawings to be followed in the construction or assembly of sheet metal products.
- Fabricate or alter parts at construction sites, using shears, hammers, punches, or drills.
- Select gauges or types of sheet metal or nonmetallic material, according to product specifications.
- Maneuver completed units into position for installation, and anchor the units.
- Transport prefabricated parts to construction sites for assembly and installation.
- Drill and punch holes in metal, for screws, bolts, and rivets.
Education
Diploma -
Eastern Randolph High School
Ramseur, NC01.1993
Skills
- Approachable demeanor
- Collaborative teamwork
- Client support
- Analytical problem-solving
- Meticulous attention to detail
- Effective multitasking
- Adaptable to change
- Analytical reasoning
- Proficient in computer applications
Timeline
Janitorial Assistant
Sizemoore Inc.
08.2021 - 11.2021
Roofing Laborer
H & H Roofing
07.2021 - 10.2021
Assistant
Moores Handy Man Services
09.2017 - 07.2021
Cashier
Dollar General Store
04.2015 - 07.2015
PC/PSP Repair
Self Employed
02.2005 - 05.2005
General Warehouse Associate
K-Mart Distribution Center
08.1995 - 05.2005
Machine Operator
Kinro Inc
05.1993 - 09.1996
Sheet Metal Worker
Air Treatment, Inc
05.1991 - 08.1991
Diploma -
Eastern Randolph High School