KEVIN JAMES

Orbital weld

Commissioned domestic water, cold and hot water, city water, steam and condensate, and natural gas

Fiber glass chemical drains with epoxy

• Utilized blueprints and diagrams to compare finished products against design specifications.

Maintain process piping systems

Tig and orbital welding

Welded carbon and stainless spools using GTAW

• Prepared welding equipment to perform advanced welding work.

Install processed piping in industrial modular units

• Set up and operated shielded metal arc and gas metal arc welding equipment.
• Clamped, held, tack-welded, heat-bent and bolted component parts to achieve required configurations and positions.
• Fabricated shop parts directly from blueprints.
• Inspected welds and checked critical measurements to meet specifications.
• Completed welding projects using gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, and shielded metal arc equipment.
• Welded in flat, horizontal, vertical, and overhead positions.
• Chipped off excess weld, slag, and spatter using hand tools.
• Removed and repaired unacceptable welds with air arc and grinder to meet quality guidelines.

• (GTAW) S.S pipe and tubing in accordance with AWS D10.18 /D18.1/2 D10.11/12 SMAW Chill water piping and supports.

• Tig Welder -Stainless, carbon, aluminum, inconel
• Pull Schedule, plan work by due dates. Worked as Assembly lead for second shift.
• Cut, bend, and fab. Tubing using, Carson Bender and CPM bending machine.
• Build industrial sized ASME coils using Solid Works EPDM drawings.
• Expand coils using hydraulic 25000 psi expander.
• Cut and bevel Pipe used for ASME headers.
• GTAW, steel coils in accordance with ASME gt-8 specification of various types of metals including Stainless Steel 304-316 Carbon Steel Aluminum and Inconel. In addition to Mig and Tig welding angle iron brackets for lifting and support.
• Able to Program Orbital Welder to satisfactorily, weld x -rayable welds of small bore tubes including 1inch to two inch .083, .135 wall.

• Install, traps, valves, pumps, meters, related piping and equipment in pneumatic and hydraulic piping systems.
• Install heating and cooling coils, traps, flow meters, and refrigeration piping.
• Install and maintain water and steam distribution piping and control equipment, distribution system equipment.
• Set Chillers and Air Handlers.
• Draw layouts and as builts, and read and interpret blueprints and drawings.
• Perform general sheet metal work and installation as required.
• Assist welder in Weld using arc, gas, heliarc and spot welding techniques.
• Perform brazing and soldering in refrigerant and domestic supply and return water lines.
• Assist in directing the work of apprentices.

• Install, traps, valves, pumps, meters, related piping and equipment in pneumatic and hydraulic systems.
• Install heating and cooling coils, traps, flow meters, and refrigeration piping.
• Install and maintain water and steam distribution piping and control equipment, distribution system equipment.
• Set Chillers and Air Handlers.
• Draw layouts and as builts, and read and interpret blueprints and drawings.
• Perform general sheet metal work and installation as required.
• Assist welder in Weld using arc, gas, heliarc and spot welding techniques.
• Perform brazing and soldering in refrigerant and domestic water lines.
• Assist in directing the work of apprentices.

• Install, traps, valves, pumps, meters, related piping and equipment in pneumatic and hydraulic systems as shown on P&ID.
• Read and interpret blueprints and drawings.
• Install Chemical distribution piping according to ISO.
• Install Pneumatic control tubing stainless and copper.
• Layout and set chemical storage tanks.
• Assist in directing the work of apprentices.

• Assist Machinist in setting up press by installing tool dies.
• Move materials to work area by forklift.
• Temporary Position

• Layout house for material
• Install ductwork
• Wire unit
• Duct Seal placement
• Hook up flex registers
• Braze refrigerant line, and
• Inspect work for completion and code compliance.

• Reviewed ISO and planned work accordingly
• Cut, bore and threaded pipe to specifications using tools such as Porta Bands, Sawzalls, grinders, cutting torches, pipe threaders, electric and magnetic drills, and pipe benders.
• Assist Pipefitter of fabrication of carbon, stainless steel and chrome piping for plant systems.
• Labeled, and coded finished spools for shipping.

• Cut, bore and threaded pipe to specifications using tools such as Porta Bands, Sawzalls, grinders, cutting torches, pipe threaders, electric and magnetic drills, and pipe benders.
• Assist Pipefitter of fabrication of carbon, stainless steel chrome piping and copper for plant systems for various Pneumatic, and Hydraulic
• Assist Pipefitter in Hydrostatic and Air testing of pipe systems.

• Assist Lead Mechanic in Layout house for material
• Assist lead Mechanic in installation of ductwork
• Assist lead Mechanic in wiring unit
• Duct Seal placement
• Hook up flex registers
• Braze refrigerant line