Summary
Overview
Work History
Education
Skills
Timeline
Generic

Kevin Cero

Concord

Summary

Seasoned technician with over 23 years of experience working on construction job sites in full compliance with safety and quality requirements. Skilled at meeting challenging objectives.

Overview

23
23
years of professional experience
1998
1998
years of post-secondary education

Work History

Engeering technician III- Materials and Test

NCDOT
Raleigh
10.2015 - 04.2024
  • Responsible for sampling, testing and inspecting materials on project/plants
  • Inspection of RCP pipe
  • Witnessing and recording cylinder breaks for acceptance
  • Performed troubleshooting and repair of equipment in accordance with manufacturer specifications.
  • Tested and calibrated instruments to ensure accuracy and reliability of data.
  • Followed safety practices to safeguard against injury and damage to property.
  • Installed new components or replaced defective parts to restore functionality.
  • Replaced defective components or parts as needed.
  • Inspection of precast structures
  • Calibrating latex concrete trucks
  • Preformed assessments of producers, contractors, and technicians
  • Provided instruction in the department certification program
  • Involved in low cylinder investigations
  • Camera pipe
  • Annual producer plant Inspections
  • Help teach concrete field tech school
  • Help teach concrete batch school
  • Completed routine maintenance and repair on concrete equipment
  • Completed day-to-day duties accurately and efficiently.
  • Demonstrated strong problem-solving skills, resolving issues efficiently and effectively.
  • Managed time effectively to ensure tasks were completed on schedule and deadlines were met.
  • Involved in multiple pilot programs

Lead Inspector- construction

NCDOT
Albemarle
11.2002 - 10.2015
  • Utilized advanced technical skills and expertise to troubleshoot complex problems and implement solutions.
  • Maintained updated knowledge through continuing education and advanced training.
  • Worked successfully with diverse group of coworkers to accomplish goals and address issues related to our products and services.
  • Collaborated closely with project managers to ensure adherence to all relevant laws, regulations, and guidelines.
  • Verified that projects are being constructed according to approved plans and specifications.

  • Identified discrepancies between actual work performed and approved plans or documents.
  • Developed and implemented inspection procedures, policies, best practices and competency requirements.
  • Reported and tracked deviations from quality standards and recommended corrective action to appropriate personnel.
  • Resolved conflicts between contractors regarding quality assurance issues or contractual obligations.
  • Trained new inspectors on proper inspection techniques, safety protocols, and regulatory compliance.
  • Participated in continuous education programs to stay updated on new laws, regulations, and inspection techniques.
  • Filled out and submitted logs and paperwork on-time.
  • Performed routine safety audits on manufacturing equipment and machinery, identifying potential hazards and recommending corrective actions.
  • Utilized specialized equipment to test materials and products for durability, safety, and performance standards.
  • Conducted detailed inspections of residential and commercial construction projects to ensure compliance with local, state, and federal building codes.
  • Facilitated cross-functional meetings to discuss inspection findings and collaborate on improvement strategies.
  • Approved incoming materials by confirming specifications and conducting measurement tests.
  • Generated detailed reports outlining inspection and testing results.
  • Rejected products and materials failing to meet expectations.
  • Identified acceptable components and rejected defective products.
  • Implemented and oversaw inspection schedules to ensure timely and efficient completion of tasks.
  • Participated in training to strengthen and develop inspector competencies.
  • Coordinated with engineers and architects to resolve compliance issues discovered during inspections.
  • Matched arriving materials with purchase orders, submitted discrepancy forms as necessary.
  • Notified supervisors or other relevant personnel of test or production issues.
  • Learned new testing methods through continued education and research.
  • Cleaned and calibrated dial indicators, fixed gauges, or height gauges prior to tests.
  • Calibrated products to match design and operational specifications.
  • Maintained accurate records of all inspections conducted along with associated notes.

Mallard Creek Project

2002-2004
Responsible for day to day task that accompany a project as well as

  • erosion control
  • traffic control
  • waterline/sewer line
  • seed and mulch
  • curb and gutter
  • guardrail
  • daily diary
  • Assist survey party
  • Checking elevations for structures
  • Set off sets
  • Cross section borrow pit
  • Measure trucks for borrow mat
  • Oversaw drainage structure install
  • Plan reading for bridge structure
  • Inspection of 2 bridges
  • Chemical stabilization
  • Conventional density
  • Concrete
  • Paving
  • Thermography plastic
  • Materials received

Lawyers Road

2004-2005

Responsible for day to day task that accompany a project as well as

  • Delegate work load for multiple inspectors
  • RCP install
  • Oversaw drainage box install
  • Seed and mulch
  • Widening
  • Paving
  • Estimates

Mitigation of Back Creek Ch Rd

2005-2006

(Protected waters)

Responsible for day to day task as well as

  • Meandering new stream
  • Install of cross lanes
  • Installation of ripples, rock barbs, rock weirs, and silt bags
  • Pumping existing stream
  • Installation of silt fencing and wire fencing

Resurfacing Stanly and Cabarrus County

2006-2008

Responsible for

  • Milling pavement
  • Leveling
  • Paving
  • Striping
  • Paving reports
  • Ticket books
  • Daily diaries

Odell School Rd.

2008-2009

Lead inspector responsible for the day to day task on a project as well as

  • Installing turn lane
  • Widening existing roadway
  • Testing concrete
  • Conventional density
  • Monthly estimates
  • Make PRB
  • Silt fence
  • Sidewalk install
  • Thermo/striping

Bridge replacement Orphanage Rd

2009-2010 (protected stream)

Lead inspector responsible for day to day task that accompany the project as well as

  • Bridge removal
  • Road closure
  • Bridge build
  • Raise Road elevations
  • Oversaw gas line Installation, water line installation, and sewer line installation
  • RCP install
  • Create pay record book
  • Monthly estimates
  • H Pile installation for bridge caps
  • Installation of cord precast slabs

Cabarrus County Rest Area

2010-2012

Lead inspector r esponsible for overseeing the renovation of existing buildings and construction of new buildings. Including

  • Water and sewer lines
  • RCP
  • Retaining wall installation
  • Milling
  • Paving and paving reports
  • Curb and gutter
  • Seeding and mulch
  • Erosion control
  • Daily diary
  • Etc

Cabaarus Ave Bridge over R&R

2012-2013

Responsible for day to day task as well as

  • Widening existing bridge over track
  • Borrow pit cross sectioning
  • Truck measurements
  • Traffic shifts
  • Silt basin
  • Measurements for silt excavation
  • Drainage boxes and pipe
  • Sewer and water lines
  • Estimates

Harrisburg Rd Roundabout

2013-2014

Lead inspector responsible for day to day project task as well as

  • Road closures and traffic control
  • Estimates
  • Paving
  • Sidewalk installation
  • Guardrail installation

Graham St Extension

2014-2015

Lead inspector responsible for day to day task of a project as well as

  • Drainage pond
  • Lane shifts
  • Clearing and grabbing
  • Estimates
  • Drainage pipe and boxes
  • Water and sewer lines
  • Pay record books
  • Erosion control

Road oil

NCDOT
Albemarle
03.2001 - 11.2002
  • Conducted comprehensive research and data analysis to support strategic planning and informed decision-making
  • Completed day-to-day duties accurately and efficiently.
  • Measure pavement for yearly patching and paving
  • Figure material for paving
  • Cross section stock piles
  • Run equipment
  • Delegate crews and equipment
  • Provided support and guidance to colleagues to maintain a collaborative work environment.
  • Demonstrated strong problem-solving skills, resolving issues efficiently and effectively.

Education

Dundee High School
Dundee, NY

Skills

  • Material testing
  • Equipment calibration
  • Safety compliance
  • Inspection procedures
  • Troubleshooting techniques
  • Quality assurance
  • Project management
  • Regulatory knowledge
  • Collaboration skills
  • Time management
  • Effective communication
  • Instructional skills
  • Attention to detail
  • Health and safety regulations
  • Works Well Under Pressure
  • Work Planning and Prioritization
  • Environmental compliance
  • Multitasking and organization
  • Construction management
  • Project Support
  • Routine Inspections
  • Product Inspections
  • Staff education and training

Timeline

Engeering technician III- Materials and Test

NCDOT
10.2015 - 04.2024

Lead Inspector- construction

NCDOT
11.2002 - 10.2015

Road oil

NCDOT
03.2001 - 11.2002

Dundee High School
Kevin Cero